How To Configure Ip Camera In Nvr

Cameras connection to NVR Troubleshooting

Troubleshooting IP cameras connect to the NVR

Unifore Security

Nov 09,2016-11:06 PM

Though nowadays's IP video surveillance equipment becomes more and more easy to setup and use, some users may nevertheless see some problems if they are newbies to the IP video surveillance organisation. We herein present you the easy, simply very useful IP camera and NVR troubleshooting info that tin assistance you lot to observe and solve the problem,then employ your equipment smoothly.

5. NVR can observe the IP camera in the same local network, still can't be added and shows "connection timeout fault".

In loal network, if NVR can discover the IP camera merely shows connection timeout error, users should check the NVR's IP accost conflicts with the IP accost of connected IP camera. If both IP photographic camera and NVR have the aforementioned IP address, please change NVR'south IP accost. If there is no conflict, delight cheque the network switch functionality, or replace another network switch to test.

4. What's the reason when the NVR connected to the IP camera just other aqueduct image disappeared?

When the NVR connected to the IP camera, but 1 of other channel's image disappeared, please check v things as beneath:

Making sure network switch's LEDs are light upwards, if all LED indicators are off, and then power supply should be the problem.
Making certain network switch'due south LEDs are light up, if all LED indicators are off, then delight cheque network switch and power cable connexion problem.
Making sure IP photographic camera is working, if IP camera doesn't work, please check the ability supply if it causes the trouble.
If using optical fiber equipment, please cheque optical fiber transceiver's LEDs are lite up, if all LED indicators are off, then the trouble comes from ability adapter.
If using optical fiber equipment, please bank check optical fiber transceiver's LEDs are low-cal upwards, if all LED indicators are off, then the problem comes from transceiver itself or cobweb cablevision connection.

3. Why afterwards connected the camera, the image keeps flicking or disconnecting?

If this problem occurs, please the 3 things as below:

Check if all network switches connected to the same quantity of IP cameras, making sure each of IP camera tin take average/counterbalanced network resource.
Making sure the NVR has sufficient network bandwidth, if not, please connect the NVR to the Gigabit network switch.
Check the RJ45 socket, making sure the cables are firmly connected with the socket.

two. Why the NVR can't find/discover the new IP cameras?

If your NVR can't detect the IP cameras, please bank check the following things:

Confirm if the NVR has an unique IP address, if not, please manually assign an IP address to the photographic camera. Please note each of IP camera may accept the verbal aforementioned IP accost as the factory default setting.
Check the LED indicators on IP photographic camera, all LED indicators are lite up and Yellow LED is flicking, simply Green LED doesn't flick that mean the camera is working normally. Please check the power supply of the camera. If LED indicators bear witness correctly, you lot may use the P2P App to access the camera through Internet, and then manual alter the IP address to DHCP method. If at that place is only LAN available, please plug the IP camera to your computer directly, then modify your computer's IP address to 192.168.0.* (*>1), also modify the gateway IP address accordingly, after discovered the equipment past using search software provided by your supplier, you should manually alter the IP photographic camera's IP accost to DHCP method. If both LEDs are on, but don't picture, delight reboot your IP photographic camera.
Please check if yous had selected/ticked all protocols when searched the IP camera on NVR. Delight check if both devices are uniform with ONVIF standard.

1. NVR can find/detect IP cameras, but it can't show image.

If your NVR tin notice and find IP cameras, notwithstanding they can't show image. Then you need to change the NVR's video stream type. You tin can either increase the NVR's decoding resolution, or decrease the IP camera's stream resolution.
If the NVR can't show thumbnail/preview image, you need to check the Sub-stream/secondary stream setting. If the NVR tin can display thumbnail/preview image but after double click it to overstate, the image disappear, then you need to bank check the Main stream setting.

You may interested our another useful article: How does an IP camera connect to NVR?

If you lot too encountered some issues on camera connexion to the NVR, but found the solution, delight don't hesitate to share with us by commenting below.

Get My Latest Posts

Subscribe to get the latest updates.

Your e-mail address will never exist shared with whatever 3rd parties.